Recording to the sound pad

NOTE
  • The available recording time is five seconds.
  1. Press the [REC] button.
  • The product enters REC STANDBY mode.
  • To exit REC STANDBY mode, press the [SHIFT] button and the [REC] button at the same time.
  1. Use the [SOUND PAD] [1]–[6] buttons to select the pad to which you will record.
NOTE
  • When you long-press a pad to select it, you can check the contents of that sound pad while the button is pressed.
  1. To start recording, press the REC button again.
  • Recording starts. When you press the [SHIFT] and [REC] buttons at the same time, the recorded data is saved in this unit, and the unit exits REC STANDBY mode. If you don’t want to save the data, press the [SHIFT] button and the [SOUND PAD] button of the record destination at the same time. Doing so erases the recorded data and returns the unit to REC STANDBY mode.
NOTE
  • If the AG08 Controller app is connected, data begins synchronizing between the AG08 Controller app and this unit, and the [SOUND PAD] [1]–[6] buttons flash blue in a cyclical manner. You cannot operate this product while synchronization is in progress. Do not turn off the AG08, quit the AG08 Controller app or unplug the USB cable while data is synchronizing.