About STEREO PAIR

Channels 1 and 2 on the AG08 feature a built-in STEREO PAIR function. You can use STEREO PAIR to link channel 1 with channel 2, creating a single stereo channel. For example, this function is useful for ASMR streaming, which uses a stereo or binaural mic.

Use the AG08 Controller app to configure the STEREO PAIR settings. Press the menu [] button on the AG08 Controller, and select Settings → STEREO PAIR. A popup window appears when you press the STEREO PAIR [] button. Select [OK]. The STEREO PAIR screen shown below is shown on the Detail mode screen.

NOTE
  • Settings that are shared by channels 1/2 when linked are gate/compressor/equalizer, reverb/delay, mute and MONITOR MIX.
  • The [GAIN] knob on this unit as well as the phantom [+48V] switch, the [PAD] switch and the [GUITAR (HI-Z)] switch (CH2) are not shared via link.
  • When you turn the link on, the voice changer (CH1)/amp simulator (CH2) turn off, and you cannot recall or save presets.
  • You can control the output level for the channel 1/2 input audio by operating the channel 1 fader.
  • When STEREO PAIR is being used, STEREO PAIR is canceled when you switch to the Simple mode screen from the Detail mode screen.