Using tool buttons

The title bar on top of certain popup windows features tool buttons that provide additional functions. These buttons enable you to recall related libraries, or copy channel parameters to another channel. This section explains how to use the tool buttons.

About the tool buttons

EQ, Dynamics, Delay, GEQ/PEQ, and Plug-in popup windows feature the following tool buttons:

a

LIBRARY button

Recalls a library related to the current popup window (such as EQ, Dynamics, GEQ/PEQ, or Plug-in library).

b

DEFAULT button

Resets the EQ or Dynamics of the currently-selected channel, or GEQ/PEQ or Plug-in to their default settings.

c

COPY button

Copies the EQ, Dynamics, or Delay parameter settings of the currently-selected channel, or the GEQ/PEQ or Plug-in settings. Copied settings will be stored in buffer memory (a temporary storage area).

d

PASTE button

Pastes the settings stored in buffer memory to the EQ, Dynamics, or Delay of the currently-selected channel, or GEQ/PEQ or Plug-ins.

e

COMPARE button

Switches between and compares the settings stored in buffer memory and the EQ or Dynamics of the currently-selected channel, or GEQ/PEQ or Plug-in settings.

Copying and pasting parameters

You can copy the EQ, Dynamics, or Delay parameter settings of the currently-selected channel, or GEQ/PEQ or Plug-in settings to buffer memory, and then paste them to corresponding parameters for other channels, or a similar type of GEQ/PEQ or Plug-in.

NOTE
  • The EQ and Dynamics parameter settings will be copied and pasted per bank (A/B). You can copy and paste the parameters between Bank A and B of the same channel. For example, you can copy the parameter settings for Dynamics 1 on CH1 in Bank A to Dynamics 2 on CH144 in Bank B.
  • If 15 bands or less are used for 31BandGEQ, those parameter settings can also be copied to Flex15GEQ.
  1. Open a popup window that features tool buttons.
  1. Select a channel EQ, Dynamics, or Delay, or GEQ/PEQ or Plug-in as the copy source.
  1. Press the COPY button.
  • The current setting will be stored in buffer memory.
NOTE
  • After copying a setting, be sure to paste it to the destination BEFORE you copy another setting. Otherwise, the copied setting (in buffer memory) will be overwritten.
  • You can select only one channel, GEQ/PEQ, or plug-in as the copy source.
  1. Press the PASTE button.
  • The channel EQ, Dynamics or Delay setting, or GEQ/PEQ or Plug-in setting (selected in Step 2) will be pasted.
NOTE
  • Please note that pasting the copied settings will overwrite the settings that are currently residing in the paste destination.
  • If no data is stored in buffer memory, or if the data in buffer memory is not compatible with the data in the paste destination, the PASTE button will be disabled.