EQ screen
The EQ screen can be used to correct the frequency characteristics of the audio.
A 4-band parametric EQ is available for CH 1-16, ST IN, FX RTN 1-2, MIX 1-6, STEREO, MATRIX 1-2. A high-pass filter HPF can be used on CH 1-16. This screen also allows you to switch between the easy to operate 1-knob mode just with the [TOUCH AND TURN] knob and the manual mode, where individual parameters can be manipulated.
4-band parametric EQ
a | EQ buttons Turns the EQ ON/OFF. |
b | HPF buttons Turns the HPF (high-pass filter) ON/OFF. Displayed for CH 1–16. |
c | 1-knob buttons Switches between 1-knob EQ mode and manual mode. When using 1-knob EQ mode, the 1-knob level slider is displayed. |
d | 1-knob level slider Adjusts the amount of 1-knob EQ applied.
When using manual mode, information about the selected band's Q, F, and G is displayed here. |
e | EQ mode type selection button In manual mode, this button selects the filter type. You can switch the filter type between LOW band and HIGH band. For CH 1-16, the available LOW band filters are low-shelving type and bell type. For other channel EQs, (i.e., for channel EQs that do not have an HPF), you can choose from HPF, low-shelving, and bell types. The available HIGH band filters are LPF, high-shelving, and bell types. In 1-knob EQ mode, you can select the 1-knob EQ type. Select “Vocal” for vocal channels, and “Intensity” for anything else. When set to “Intensity”, you can adjust the EQ to a setting between flat and a more intense value of EQ settings made using manual mode. “Loudness” is available for the EQ of output channels. This setting allows you to boost low and high tones. The available types depend on the channel whose settings you are editing. |
| CH 1-16 HPF+4Band | ST IN 4Band | FX RTN 4Band | MIX 4Band | STEREO 4Band | MATRIX 4Band |
|---|---|---|---|---|---|---|
Intensity | , | , | , | , | , | , |
Vocal | , | ― | ― | ― | ― | ― |
Loudness | ― | ― | ― | , | , | , |
f | EQ output level meter Displays the EQ's output level. |
g | EQ graph Displays the parameter settings of the EQ and filter. As you adjust the settings of each band, the results are reflected in the graph. When using 1-knob EQ mode, you can touch the 1-knob level slider and then adjust the slider using the 1-knob level slider itself or the [TOUCH AND TURN] knob. When using manual mode, you can drag the handles in the graph to adjust the settings. When HPF is turned ON, you can drag the HPF handle to adjust the cutoff frequency. You can also adjust HPF independently when using the Intensity type in the 1-knob EQ mode.
|
h | RTA/Keyboard display You can touch the bottom of the graph where no parameters are displayed to toggle through RTA, keyboard and no display in order. RTA is a graph that displays the frequencies of the input signal after the EQ is applied. The keyboard display is helpful for understanding the relationship between frequencies and musical pitches.
|
i | RTA Offset Adjusts the RTA sensitivity. Touch to highlight and then adjust with the [TOUCH AND TURN] knob. |
EQ screen menu
Swipe left on the menu swipe indicator on the right of the EQ screen to open the following menu.
a | Copy Copies the EQ parameters of the selected channel. |
b | Paste Pastes the copied EQ parameters to the selected channel. |
c | Compare Allows you to compare the EQ parameters of the selected channel with the copied EQ parameters by switching between the two. |
d | Gain Flat Sets the EQ gain on the selected channels to flat. |
e | Default Resets EQ settings to their default values. |
DM3 Series