SEND TO Screen

The SEND TO screen allows you to configure the amount of signal that is sent from each channel to the MIX/MATRIX BUS.

You can swipe left and right to view other buses.

a

SEND ON buttons

Determines whether a signal is sent (ON) or not sent (OFF) to the MIX/MATRIX BUS.

b

SEND LEVEL slider

Adjusts the amount of signal sent to the MIX/MATRIX BUS.

c

Pre buttons

Selects whether the signal sent to the MIX/MATRIX BUS is sent before or after the fader.

  • ON:
  • Before the fader
  • OFF:
  • After the fader

When set to ON, you can select before EQ or before fader with the Pre Fader Send Point on the BUS SETUP screen.

d

SEND PAN slider

Displayed when the MIX/MATRIX BUS sending destination is stereo. It adjusts the sending pan.

Related links