Context menus

In some areas, a context menu appears when you right-click.
A context menu does not appear in the "Devices" area, the "Network" area, or the "Bird’s Eye" view.

1. Sheet tabs

The following context menu appears when you right-click a sheet tab.

Menu	Content
[Close]	Closes the sheet.

Content

[Close]

Closes the sheet.

2. "Project" sheet

The following context menu appears when you right-click the "Project" sheet.

Menu	Content
[Paste]	Pastes the copied object onto the sheet.
[Select All]	[All] Selects all objects in the sheet. If you want to select the devices in a device group, select the device group and then choose [All].
[All Devices] Selects all devices in the sheet. If you want to select the devices in a device group, select the device group and then choose [All Devices].
[All Wires] Selects all wires in the sheet. If you want to select the wires in a device group, select the device group and then choose [All Wires].
[All Graphics] Selects all graphics in the sheet. If you want to select the graphics in a device group, select the device group and then choose [All Graphics].
[Close All Editor Windows]	Closes all editors.
[Snap to Grid]	If this is checked, objects are placed in alignment with the grid of the sheet.

Content

[Paste]

Pastes the copied object onto the sheet.

[Select All]

[All]
Selects all objects in the sheet. If you want to select the devices in a device group, select the device group and then choose [All].

[All Devices]
Selects all devices in the sheet. If you want to select the devices in a device group, select the device group and then choose [All Devices].

[All Wires]
Selects all wires in the sheet. If you want to select the wires in a device group, select the device group and then choose [All Wires].

[All Graphics]
Selects all graphics in the sheet. If you want to select the graphics in a device group, select the device group and then choose [All Graphics].

[Close All Editor Windows]

Closes all editors.

[Snap to Grid]

If this is checked, objects are placed in alignment with the grid of the sheet.

2.1. Device in the "Project" sheet

The following context menu appears when you right-click a device in the "Project" sheet.

Menu	Content
[Open Device]	If this item has a check mark, the device’s output jacks are shown. This is the same as using the [+] button in the upper left of the device. This menu applies only to power amps.
[Open Device Sheet]	Opens the device sheet of the device. This is the same as double-clicking the device.
[Identify]	Causes the indicators of the device to flash for several seconds.
[Alert Information]	When executed on a device that is shown in red text, displays the "Alert" dialog box.
[Cut]	Moves the device to the copy buffer.
[Copy]	Copies the amp including its parameter settings.
[Paste]	Duplicates the device in the copy buffer, including its parameter settings.
[Paste Parameters]	If you select an existing device and execute this, the copied device parameters are applied.
[Duplicate]	Duplicates the device including its parameter settings.
[Delete]	Deletes the device.
[Add to Link Group]	Registers the device’s channels in a link group.
[Create Device Group]	Registers the selected objects in a device group.
[Bring to Front]	Moves the device display to the foreground.
[Send to Back]	Moves the device display to the background.
[Device Mute]	Mutes the device.

Content

[Open Device]

If this item has a check mark, the device’s output jacks are shown. This is the same as using the [+] button in the upper left of the device. This menu applies only to power amps.

[Open Device Sheet]

Opens the device sheet of the device. This is the same as double-clicking the device.

[Identify]

Causes the indicators of the device to flash for several seconds.

[Alert Information]

When executed on a device that is shown in red text, displays the "Alert" dialog box.

[Cut]

Moves the device to the copy buffer.

[Copy]

Copies the amp including its parameter settings.

[Paste]

Duplicates the device in the copy buffer, including its parameter settings.

[Paste Parameters]

If you select an existing device and execute this, the copied device parameters are applied.

[Duplicate]

Duplicates the device including its parameter settings.

[Delete]

Deletes the device.

[Add to Link Group]

Registers the device’s channels in a link group.

[Create Device Group]

Registers the selected objects in a device group.

[Bring to Front]

Moves the device display to the foreground.

[Send to Back]

Moves the device display to the background.

[Device Mute]

Mutes the device.

2.2. Speaker in the "Project" sheet

When you right-click a speaker in the "Project" sheet, the following context menu appears, although menu items may be present or absent depending on the device that is connected.

Menu	Content
[Open Speaker]	If this item has a check mark, the speaker’s input jacks are shown. This is the same as using the [+] button in the upper left of the speaker.
[Open Speaker Editor]	Opens the "Speaker Editor". This is the same as double-clicking the speaker.
[Open Multiple Speaker Editor]	If multiple speakers are selected, this opens the "Multiple Speaker Editor". If a single speaker is selected, the "Speaker Editor" opens.
[Recall Speaker Preset(s)]	Opens the "Recall Speaker Preset(s)" dialog box.
[Cut]	Moves the speaker to the copy buffer.
[Copy]	Copies the speaker to the copy buffer.
[Paste]	Duplicates the speaker in the copy buffer, including its parameter settings.
[Duplicate]	Duplicates the speaker.
[Delete]	Deletes the speaker.
[Add to Link Group]	If the speaker is connected to an amp, registers the channel of the connected amp.
[Create Device Group]	Registers the selected objects in a device group.
[Bring to Front]	Moves the speaker display to the foreground.
[Send to Back]	Moves the speaker display to the background.

Content

[Open Speaker]

If this item has a check mark, the speaker’s input jacks are shown. This is the same as using the [+] button in the upper left of the speaker.

[Open Speaker Editor]

Opens the "Speaker Editor". This is the same as double-clicking the speaker.

[Open Multiple Speaker Editor]

If multiple speakers are selected, this opens the "Multiple Speaker Editor". If a single speaker is selected, the "Speaker Editor" opens.

[Recall Speaker Preset(s)]

Opens the "Recall Speaker Preset(s)" dialog box.

[Cut]

Moves the speaker to the copy buffer.

[Copy]

Copies the speaker to the copy buffer.

[Paste]

Duplicates the speaker in the copy buffer, including its parameter settings.

[Duplicate]

Duplicates the speaker.

[Delete]

Deletes the speaker.

[Add to Link Group]

If the speaker is connected to an amp, registers the channel of the connected amp.

[Create Device Group]

Registers the selected objects in a device group.

[Bring to Front]

Moves the speaker display to the foreground.

[Send to Back]

Moves the speaker display to the background.

2.3. Device group in the "Project" sheet

The following context menu appears when you right-click a device group in the "Project" sheet.

Menu	Content
[Open Group Editor]	Opens the "Group Editor".
[Cut]	Moves the device group to the copy buffer.
[Copy]	Copies the device group to the copy buffer.
[Paste]	Duplicates the device group in the copy buffer.
[Paste to Device Group]	Duplicates the device group in the copy buffer within the device group.
[Delete]	Deletes the device group.
[Select All]	[All] Selects all objects in the device group.
[All Devices] Selects all devices in the device group.
[All Wires] Selects all wires in the device group.
[All Graphics] Selects all objects in the device group.
[Linked Presets Manager for Group]	Opens the "Linked Presets Manager for Group" window with the devices in the device group as the target. For details, refer to "Linked Presets Manager" dialog box.
[Unpack Device Group]	Cancels the device group.
[Bring to Front]	Moves the device group’s display to the foreground.
[Send to Back]	Moves the device group’s display to the background.

Content

[Open Group Editor]

Opens the "Group Editor".

[Cut]

Moves the device group to the copy buffer.

[Copy]

Copies the device group to the copy buffer.

[Paste]

Duplicates the device group in the copy buffer.

[Paste to Device Group]

Duplicates the device group in the copy buffer within the device group.

[Delete]

Deletes the device group.

[Select All]

[All]
Selects all objects in the device group.

[All Devices]
Selects all devices in the device group.

[All Wires]
Selects all wires in the device group.

[All Graphics]
Selects all objects in the device group.

[Linked Presets Manager for Group]

Opens the "Linked Presets Manager for Group" window with the devices in the device group as the target. For details, refer to "Linked Presets Manager" dialog box.

[Unpack Device Group]

Cancels the device group.

[Bring to Front]

Moves the device group’s display to the foreground.

[Send to Back]

Moves the device group’s display to the background.

2.4. Text, Line, or Polygon in the "Project" sheet

The following context menu appears when you right-click a graphic such as Text, Line, or Polygon in the "Project" sheet.

Menu	Content
[Cut]	Moves the graphic to the copy buffer.
[Copy]	Copies the graphic to the copy buffer.
[Paste]	Duplicates the graphic in the copy buffer.
[Duplicate]	Duplicates the graphic.
[Delete]	Deletes the graphic.
[Create Device Group]	Registers the selected graphics in a device group.
[Bring to Front]	Moves the graphic display to the foreground.
[Send to Back]	Moves the graphic display to the background.

Content

[Cut]

Moves the graphic to the copy buffer.

[Copy]

Copies the graphic to the copy buffer.

[Paste]

Duplicates the graphic in the copy buffer.

[Duplicate]

Duplicates the graphic.

[Delete]

Deletes the graphic.

[Create Device Group]

Registers the selected graphics in a device group.

[Bring to Front]

Moves the graphic display to the foreground.

[Send to Back]

Moves the graphic display to the background.

2.5. Wire in the "Project" sheet

The following context menu appears when you right-click a wire in the "Project" sheet or a device sheet, although certain menu items may be present or absent.

Menu	Content
[Delete]	Deletes the wire.
[Bring to Front]	Moves the selected wire to the front.
[Send to Back]	Moves the selected wire to the back.
[Insert Node]	Adds a node to the wire.
[Remove Segment]	Deletes the wire segment between nodes.

Content

[Delete]

Deletes the wire.

[Bring to Front]

Moves the selected wire to the front.

[Send to Back]

Moves the selected wire to the back.

[Insert Node]

Adds a node to the wire.

[Remove Segment]

Deletes the wire segment between nodes.

2.6. "Network" area

The following context menu appears when you right-click a device.

Menu	Content
[Alert Information]	When executed on a device that is shown in red text, displays the "Alert" dialog box.
[Identify]	Causes the indicators of the device to flash for several seconds.
[Sign Up] (RM series only)	Opens the “RM Series Settings > Sign up” dialog box.
[Login] (RM series only)	Opens the “RM Series Settings > Log In” dialog box.

Content

[Alert Information]

When executed on a device that is shown in red text, displays the "Alert" dialog box.

[Identify]

Causes the indicators of the device to flash for several seconds.

[Sign Up] (RM series only)

Opens the “RM Series Settings > Sign up” dialog box.

[Login] (RM series only)

Opens the “RM Series Settings > Log In” dialog box.

3. Device sheet

3.1. Components and component editors in the device sheet

When you right-click somewhere other than on a component’s controller, or on a component, the following context menu appears (not all items are shown for all components).

Menu	Content
[Open Component Editor]	Opens the component editor.
[Copy]	Copies the parameter settings of the component editor.
[Paste Parameters]	Applies the copied parameter settings of the component editor.

Content

[Open Component Editor]

Opens the component editor.

[Copy]

Copies the parameter settings of the component editor.

[Paste Parameters]

Applies the copied parameter settings of the component editor.