4. Using the Product

4.1. Turning the Power On and Off

Press and hold the power button ( icon power buttery ) for 2 seconds or more to turn the power on. Press and hold again for 2 seconds or more to turn off the power.

YVC200 Power bottom

note Note

  • When not charging, if there is no operation for 3 minutes or more, the power turns off automatically (automatic power off function).

4.2. Adjusting the Speaker Volume

The speaker volume is adjusted by pressing the Volume +/- button ( Volume buttons ). If you press and hold for 0.5 seconds or more, the volume changes continuously.

note Note

  • Adjust the speaker volume so that the sound does not break up. Echoes may occur for the other person on the call.

  • When connected to a computer via USB cable, when the speaker volume setting is changed on the computer, the speaker volume of this product also changes according to that value.

4.3. Muting/Unmuting the Microphone

You can temporarily stop (mute) the microphone function.

4.3.1. Muting the Microphone

Press the microphone mute button ( MicMute button11 ).
The microphone indicator changes color to red and the microphone is muted.

4.3.2. Unmuting the Microphone

Press the microphone mute button ( MicMute button11 ) while the microphone is muted.
The microphone indicator changes color to green and the microphone is unmuted.

4.4. Muting/Unmuting the Speaker

You can temporarily stop the output from the speaker.

4.4.1. Muting the Speaker

Press the microphone mute button ( mute button ).
The ring part of the microphone indicator turns off and the speaker is muted.

4.4.2. Unmuting the Speaker

Press the speaker mute button ( mute button ) while the speaker is muted.
The ring part of the microphone indicator light up and the speaker is muted.

note Note

  • If you press the Volume +/- button ( Volume buttons ) while the speaker is muted, the speaker becomes unmuted.

  • When connected to a computer via USB cable, when the speaker is muted on the computer, the speaker is also muted on this product.

4.5. Answering an Incoming Phone Call/Ending a Phone Call on a Smartphone

When connected to a smartphone via Bluetooth, you can answer incoming phone calls and end phone calls on the smartphone from this product.

4.5.1. Answering an Incoming Phone Call

When there is an incoming phone call on the smartphone connected via Bluetooth, the microphone indicator flashes rapidly. If you press the call button ( Hook button ) at this time, you can communicate using the microphone and speaker on this product.

note Note

  • When an incoming phone call is answered, the microphone and speaker on the smartphone may become enabled depending on the smartphone. In this case, select YVC-200 in the audio source settings of the smartphone to enable the microphone and speaker of this product.

4.5.2. Ending a Phone Call

You can end a phone call by pressing the call button ( Hook button ) while in a phone call.