Device settings

This section explains how to set up the device itself.

Supported devices

You can configure the following devices in the Control Center:

Device-specific settings

CC1

  • Firmware Update
    Updates the firmware of CC1.

  • LED Brightness
    Adjusts the brightness of the LED buttons.

  • LCD Brightness
    Adjusts the brightness of the LCD keys.

  • Fader Motor Enabled
    Toggles the motor drive of the fader on/off.

  • Fader Touch Sense Sensitivity
    Adjusts the touch sense sensitivity of the fader.

  • Fader Calibration
    Calibrates the fader motor. This is useful if there is a discrepancy in the operation of the fader motor.

  • Foot Pedal Mode
    Toggles the foot pedal’s Switch/Volume mode.