Warning messages from YPAO

If a warning message is displayed after the measurement, you can still apply the measurement results by following on-screen instructions.

However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings.

TV screen

Warning message

Remedy

WARNING 1

A speaker cable may be connected with the reverse polarity (+/-).

Use the cursor keys to select “Measurement result” and press ENTER, and then select “Wiring” in “Measurement result”. Check the cable connections (+/-) of the speaker identified by “Reverse”.

If the speaker is connected incorrectly:

Turn off the unit, reconnect the speaker cable.

If the speaker is connected correctly:

Depending on the type of speakers or room environment, this message may appear even if the speakers are connected correctly. In this case, you can ignore the message.

WARNING 2

A speaker is placed more than 24 m (80 ft) from the listening position.

Use the cursor keys to select “Measurement result” and press ENTER, and then select “Distance” in “Measurement result”. Check the speaker identified by “>24.00m (>80.0ft)”. Exit YPAO, turn off the unit, and place the problem speaker within 24 m (80 ft) of the listening position.

WARNING 3

There are significant volume differences between the speakers.

Use the cursor keys to select “Measurement result” and press ENTER, and then select “Level” in “Measurement result”.
Check the speaker identified by “>+10.0dB” or “<-10.0dB”.
Then, check the usage environment and cable connections (+/-) of each speaker, and the volume of the subwoofer. If there is any problem, exit YPAO, turn off the unit, and then reconnect speaker cable or correct the speaker positions. We recommend using the same speakers or speakers with specifications that are as similar as possible.