Selecting the HDMI signal format
Problems such as a lack of sound or the appearance of abnormal colors in a video may occur when some AV devices are connected to the unit. Should this occur, changing the setting may resolve these issues.
Mode 1 (default) | Select this mode in most cases. |
Mode 2 | Select this mode if problems such as the appearance of abnormal colors in video have occurred. |
- Turn on the unit.
- Press STEREO for at least five seconds.
- Once the indicator has shown the setting applied to the unit as follows, the unit will turn on.
Related links
- Changing the brightness of the indicators (Dimmer)
- Configuring the HDMI control function
- Configuring HDMI audio output
- Setting the auto power standby function
- Enabling/disabling touch panel control (Child Lock function)
- Enabling/disabling the network standby function
- Enabling/disabling the wireless (Wi-Fi) function
- Enabling/disabling the Bluetooth function
- Updating the unit’s firmware
- Pairing the center unit and subwoofer manually
- Initializing the unit
- Setting the dynamic range compression