Enabling/disabling the wireless (Wi-Fi) function
Enable or disable the wireless (Wi-Fi) function.
This function is enabled by default.
- Turn off the unit.
- Press and hold NET for at least five seconds.
- The wireless (Wi-Fi) function is enabled or disabled.
- Once the indicator has shown the wireless (Wi-Fi) function setting applied to the unit as follows, the unit will turn on.
NOTE
- Press INFO to confirm whether the wireless (Wi-Fi) function is enabled or disabled. For details, see the following:
Related links
- Changing the brightness of the indicators (Dimmer)
- Configuring the HDMI control function
- Configuring HDMI audio output
- Setting the auto power standby function
- Enabling/disabling touch panel control (Child Lock function)
- Enabling/disabling the network standby function
- Enabling/disabling the Bluetooth function
- Updating the unit’s firmware
- Pairing the center unit and subwoofer manually
- Selecting the HDMI signal format
- Initializing the unit
- Setting the dynamic range compression