Turning on/off the power of zones

Switch the power of each zone between on and off.

  1. Set the zone switch on the remote control to the zone that you want to operate.
  1. Press z.
  • Each time you press the key, you can turn on/off the zone.
  • When the zone is turned on, “ZONE” lights up on the front panel.
NOTE
  • If all of the zones are turned off, the unit switches to the standby mode.
  • You can switch the power of the zone in the “Front Display” menu when “Power Amp Assign” in the "Setup" menu is set to “ZoneB”.