Performing pairing with a Bluetooth® device
When connecting a Bluetooth device to the unit for the first time, a pairing operation is required. Pairing is an operation that registers the Bluetooth devices with each other beforehand. Once pairing has been completed, subsequent reconnection will be easy even after the Bluetooth connection is disconnected.
Note
- To use the Bluetooth function, turn on the Bluetooth function of a Bluetooth device.
- To use the Bluetooth function, set “Bluetooth” in the “Setup” menu to “On”. For details, see the following:
Option menu
“Pairing”
- Press BLUETOOTH to select “Bluetooth” as the input source.
- Press OPTION.
- Use the cursor keys to select “Pairing” and press ENTER.
- “Searching…” appears on the front display.
Note
- If another Bluetooth device is already connected, disconnect the Bluetooth connection before you perform a pairing operation.
- To cancel pairing, press MEMORY.
- Turn on the Bluetooth function on your device.
- From the Bluetooth device list on your device, select “******* Yamaha” (*******: model name of the unit).
- After pairing has been completed and the unit is connected to the Bluetooth device, “Connected” appears on the front display. While a Bluetooth connection is established, the Bluetooth indicators light up.
Note
- If you are prompted to input a passkey during a pairing procedure, input the numerals “0000”.
- Complete a pairing procedure within 30 seconds.
- If no Bluetooth devices are found, “Not found” appears on the front display.
Related links
- Basic operation of the Option menu
- Option menu items
- Switching the input source
- Adjusting the tone of the audio output
- Configuring DSP/Surround
- Correcting volume differences during playback
- Enabling Lipsync adjustment
- Checking information about the video/audio signals
- Combining audio of another input source with video of the current input source
- Selecting a video source to be output with the selected audio source
- Switching between stereo and monaural for FM radio reception
- Setting presets for radio stations
- Receiving traffic information automatically
- Configuring the repeat setting
- Connecting a previously-connected Bluetooth® device
- Disconnecting the connection with a Bluetooth® device
- Enabling automatic switching of the input source when Bluetooth® connects