Option menu items

Use the following table to configure playback settings of the unit.

Note
  • Available items vary depending on the selected input source.
  • Text in parentheses denotes indicators on the front display.

Item

Function

Page

Input Select (Input Select)

Switches the input source.

Tone Control (Tone Control)

Adjusts the level of high-frequency range and low-frequency range individually.

DSP/Surround (DSP/Surround)

Program (PRG)

Select the sound programs and stereo playback.

Sur.Decode
(SrDec)

Select which surround decoder is used when Sur.Decode is selected as the program.

DSP Level
(DSP Level)

Adjusts the sound field effect level.

Adaptive DRC (A.DRC)

Sets whether the dynamic range (from maximum to minimum) is automatically adjusted to the volume.

Enhancer (Enhancer)

Enables/disables Compressed Music Enhancer.

Volume Trim (Volume Trim)

Input Trim (In.Trim)

Corrects volume differences between input sources.

Subwoofer Trim (SW.Trim)

Fine-adjusts the subwoofer volume.

Lipsync (Lipsync)

Enables/disables the “Lipsync” setting in the “Setup” menu.

Signal Information (Signal Info.)

Displays information about the video/audio signals.

Audio In (Audio In)

Combines the video of the selected input source with the audio of a different input source.

Video Out (Video Out)

Selects a video source to be output together with the selected audio source.

FM Mode (FM Mode)

Switches between “Stereo” and “Monaural” for FM radio reception.

Preset (Preset)

Auto Preset (AUTO)

Automatically registers FM radio stations with strong signals as presets.

Clear Preset (CLEAR)

Clear radio stations registered to preset numbers.

Traffic Program (TrafficProgram)

(U.K., Europe and Russia models only)

Automatically searches for a traffic information station.

Repeat (Repeat)

Configures the repeat setting.

Pairing (Pairing)

Performs a pairing operation between the unit and your Bluetooth device.

Connect/Disconnect (Connect/Disconnect)

Connects/disconnects the Bluetooth device.

Input Interlock (Interlock)

Sets whether the input source automatically switches to "Bluetooth" when a Bluetooth connection is established.