Setting the layout of the presence speakers
Selects a presence layout when presence speakers are used. This setting facilitates the optimization of the sound field effect.
Setup menu
“Speaker” > “Configuration” > “Front Presence” > “Layout”
Settings
Front Height | Select this option when presence speakers are installed on the front wall. |
Overhead | Select this option when presence speakers are installed to the ceiling. |
Dolby Enabled SP | Select this option when using the Dolby Enabled speakers as the presence speakers. |
NOTE
- This setting is not available when “Front Presence” is set to “None”. For details on “Front Presence” in the “Setup” menu, see the following:
- For details on the layouts of the presence speakers, see the following:
Related links
- Setting your speaker system
- Setting the size of the front speakers
- Setting the use of a center speaker and its size
- Setting the use of surround speakers and their size
- Setting the layout of the surround speakers
- Setting the use of surround back speakers and their size
- Setting the use of presence speakers and their size
- Setting the crossover frequency of the low-frequency components
- Setting the use of a subwoofer
- Setting the phase of the subwoofer
- Setting the distance between each speaker and the listening position
- Adjusting the volume of each speaker
- Setting the equalizer
- Outputting test tones
- Reloading the previous YPAO adjustments