Setting the use of each speaker and its size

Selects the setting according to the use and size of your speakers.

Setup menu

Speaker” > “Configuration” > (speaker)

Settings

Small

Small speakers. As a general guideline, the woofer diameter is smaller than 16 cm (6.1/4”).

The subwoofer will produce low-frequency components (configurable in “Crossover”).

Large

Large speakers. As a general guideline, the woofer diameter is larger than 16 cm (6.1/4”).

The speaker will produce all of the frequency components.

None

No speaker is connected.

Channel audio of the speaker set to “None” will be produced from the other speakers.

NOTE
  • The speaker size of the front speakers is automatically set to “Large” when both “Subwoofer 1” and “Subwoofer 2” in the “Setup” menu are set to “None”.
  • Be sure to connect the front left and right speakers.

When no speaker in a speaker type is connected

Configuration” of the speaker type, in which no speaker is connected, in the “Speaker” is set to “None”. The other speakers will produce its channel audio.

  • Center channel audio
  • The front speakers will produce center channel audio.
  • Surround channel audio
  • The front speakers will produce surround channel audio. Virtual CINEMA DSP works in this case.
  • Surround back channel audio
  • The surround speakers and subwoofer (or front speakers) will produce surround back channel audio.
  • Presence channel audio
  • The surround speakers and subwoofer (or front speakers) will produce presence channel audio.