Front panel

The following are the names of parts on the front of the unit and an explanation of their functions.

a

z (Power) Switch/Indicator

Turns this product ON/OFF ().

When the switch is up:

The power is ON or in Standby. Pressing the zAMP key on the remote control switches the power between ON and Standby. This product also goes into Standby in the following situations.

  • When the Auto Power Standby function is activated ()

When the switch is down:

The power is OFF. This product cannot be operated with the remote control. This product cannot also be linked with a Bluetooth device, a network device, or MusicCast Controller App.

The indicator lights up as follows according to the state of power.

Power ON: Indicator lights up.

Power in Standby: Indicator is faintly lit.

Power OFF: Indicator is off.

NOTE

  • When the indicator is flashing, it means the protective circuit has been activated and the power will not turn ON, in order to protect the product. Please contact an authorized Yamaha service center to have it repaired.

b

LEFT/RIGHT Meters

These indicate the audio output levels for the LEFT & RIGHT channels.

c

VOLUME

Adjusts the volume.

d

PHONES jack

For plugging in headphones (compatible with standard stereo phone plugs).

NOTE

  • Audio cannot be output to speakers connected to this product when headphones are plugged in. Also, output from the PRE OUT jack turns OFF.

e

YPAO MIC jack

For connecting the included YPAO microphone ().

f

SPEAKERS

Switches the speakers connected to the SPEAKERS L/R CH A and B jacks on the rear panel ().

g

METER

Switches the meter functions as follows.

OFF

Meter function and lighting turn OFF.

PEAK

Functions as a peak level meter. Displays the momentary peak level of audio output.

VU

Functions as a VU (Volume Unit) level meter. Displays the effective audio output, indicating a value close to how humans sense sound.

DIMMER

Selecting DIMMER changes the brightness of the meters. When on the desired brightness, if you switch to another setting item, it fixes the brightness at that point.

h

Remote control signal receiver

Receives the signal (infrared) from the remote control ().

i

INPUT

Selects the input source ().

j

BASS

Adjusts the volume of the low-frequency range ().

k

TREBLE

Adjusts the volume of the high-frequency range ().

l

BALANCE

Adjusts the left/right balance of the volume ().

m

LOUDNESS

Adjusts to make it easier to hear bass and treble even at low volumes (). If the YPAO Volume function () is enabled, LOUDNESS adjustment cannot be used.

n

Front Display

Displays various information and menus ().

o

SELECT (PUSH-ENTER)

Used for things like operating the menus on the front display. Turn this to select an item, and press it to confirm the selection.

p

PURE DIRECT/Indicator

Switches the Pure Direct function ON/OFF (). When this is ON, the indicator lights up, and the front display turns off.

q

RETURN/CONNECT

Used for things like operating the menus on the front display.

Also used when registering this product on the MusicCast Network ().

r

PRESET

Used for recalling registered (preset) radio stations () and registered songs/Internet radio stations ().

s

Wireless LAN indicator

Lights up when this product is connected to a wireless network ().

t

Bluetooth indicator

Lights up when a Bluetooth device is connected ().

Related links