Find this switch

1. Summary

The "Find this switch" function uses the LED installed in this product to inform you of the installation location of the productin an easy-to-understand manner.

Please use it when you want to check the installationlocation of the product or when you want to show the operation target to the workers at the site.

While this function is running, the LED will be in the following states, respectively.

  • LED : The LEDs on all ports flash orange.

2. "Find this switch" execution page

This page is for executing the "Find this switch" function.

2.1. Find this switch

  • Displays the execution status of "Find this switch" function.

  • You can start the "Find this switch" function by pressing the "Start" button when it is stopped.

  • You can stop the "Find this switch" function by pressing the "Stop" button when it is running.

  • Press the "Start" button to display the dialog and select the following items to start the notification.

    • Notification method

      • Select the Type of notification from the following.

        • Blink the port LED

          • Blinks the LEDs on all ports in orange while the function is running.

          • It cannot be selected when the Current LED mode is OFF mode.

          • You can configure the LED mode in "Management → Unit settings→ LED mode setting".

    • Notification period

      • Select the time to continue the notification from the following.

        • 30 Seconds

        • 1 Minutes

        • 3 Minutes

        • 5 Minutes

        • 10 Minutes

        • 1 Hours

      • After pressing the "OK" button, the notification will be automatically stopped when the Duration of notification expires.