Restart and initialization

In this page you can restart this unit and return it to the factory-set state.

This is the top page for restart and initialization.

Here you can start the process of restarting this unit or returning it to the factory-set state.

In this page you can restart this unit.

When you press the "OK" button, the unit will restart.

If the stack function is disabled, press the "OK" button to restart the unit.

If the stack function is enabled, select the device to restartfrom the input screen and press the "Confirm" button. Then, press the"OK" button on the execute screen to restart the specified device.

Note that when you execute restart, the settings that were beingchanged will not be saved. In addition, the GUI cannot be accessed until restart has completed.

In this page you can return this unit to its factory-set state.

After you have entered the privileged password, press the"Confirm" button. Confirm the content to be executed, and if you want to return this unit to its factory-set state, press the "OK" button.

Note that when the unit is returned to its factory-set state, all settings will return to their default values, including the address for accessing the GUI.

If the stack function is enabled, only the main switch is initialized.