8. Cardioid Mode Settings

Arrange DXSmk3 series speakers in a front-back stagger pattern. Configure the cardioid mode setting on the screen. All other settings (LEVEL, POLARITY, LPF etc.) should be configured to the same settings.

note NOTE

  • Use the same DXS-XLF(-D) model, and the same input signal. You can also set the [THRU/DSP OUT] switch to [THRU] to use in a sequence
    connection. See the example arrangements below.

  • In order to maximize the cardioid characteristics, position the cabinets at least 1.2 m away from walls.

■Example arrangement with two units side by side

8 1 cardioidmode 2units

■Example arrangement with three units side by side

8 1 cardioidmode 3units