Network settings on the computer

Configure network settings for your computer.

  1. Connect the computer to a network device.

  2. Open “System Preferences” of macOS.

  3. Click the [Setup] menu on the menu bar → [Open IP Settings for PC].
    The “Network Connections” window appears.

    network connection display

  4. From the list of network adapters, select the wired LAN adapter that you want to use with LAN Monitor.

    network connection display 2

  5. Set the IP address according to your network environment.

    Note that the detection of Dante-enabled devices may not function if multiple network adaptors have been “Connected”. Also, in macOS10.15.x or later, do not turn off Wi-Fi.
    If Wi-Fi is off, Yamaha LAN Monitor cannot detect the network adapter.