12. Returning to the factory settings (initialization)

There are two ways to initialize this product.

12.1. By selecting MENU screen → UTILITY → INITIALIZE

  1. In the MENU screen, turn the main knob to select "UTILITY," and press the main knob to confirm.
    The UTILITY screen appears.

utility initialize top

  1. In the UTILITY screen, turn the main knob to select "INITIALIZE," and press the main knob to confirm.
    The INITIALIZE screen appears.

utility initialize

  1. Turn the main knob to choose the type of settings that will be initialized (multiple selections are possible), and press the main knob to confirm.
    The following table shows what can be initialized.

AMP/PROCESSING

PROCESSING
SETUP
UTILITY

AMP PRESET

AMP PRESET

NETWORK

IP SETTING
DANTE SETTINGS, UNIT ID

note NOTE

  • AMP/PROCESSING is always initialized.

  1. When you have finished making selections, turn the main knob to move to [OK], and press the main knob to confirm.

  1. In the confirmation screen, turn the main knob to select "YES," and press the main knob to confirm.
    When initialization is completed, the unit restarts automatically, and then enters the power-on state.

12.2. Initialization if you have forgotten the PIN code, etc.

If you are unable to select INITIALIZE in the UTILITY screen, for example if you have forgotten the PIN code specified for panel lock, you can initialize using the following method.

  1. Disconnect the unit from the AC outlet.

  2. While holding down channel select key [A] and the [ icon return ] (back) key, connect the unit to the AC outlet.
    A confirmation screen appears.

  3. Press the main knob to confirm.

Initialization begins. During initialization, all channel indicators are lit red.
When initialization is completed, all channel indicators are lit green, the unit restarts automatically, and then enters the standby state.