Error Messages
A, B, I
Display | Description |
AutoPowerOff | Powering down due to low battery. Please charge the battery. |
Backup Clear | Backups have been cleared. |
InternalMemory | An access error has occurred in the User Sample Memory. |
InternalMemory | There is insufficient free space in the User Sample Memory. Execute either the “IntMemOptimiz” or the “DeleteIntMem” function. |
@
P, R, S, T
Display | Description |
Please Stop | This function cannot be executed while the product is standing by to record or while recording is in progress. Either cancel the recording standby status or stop recording. |
Recording Time | Recording has been stopped because the maximum recording time (approximately 80 minutes per file) has been exceeded. Be sure to stop recording before the maximum recording time is exceeded. |
Too Long | The selected audio file cannot be loaded into the User Sample Memory because it exceeds the maximum sample time for User Samples (approximately 20 seconds per file). Adjust the length of the audio file before loading it. |
Too Short | The selected audio file cannot be loaded into the User Sample Memory because it is below the minimum sample time for User Samples. Adjust the length of the audio file before loading it. |
@
U
Unsupported | The selected audio file is in a format that is not supported by this product. Please convert the file to a format that is supported by this product before selecting it. See this page for details about formats. |
USB Device | An access error has occurred on the USB flash drive. Temporary access errors can occur, depending on the condition of the product and the performance of the USB flash drive. If they occur frequently, the performance of the USB flash drive might be insufficient. |
USB Device | The number of files in the root directory of the USB flash drive is greater than the maximum number of files this product can recognize (500 for each extension). See this page for details. |
USB Device | Insufficient free space on the USB flash drive. Either use a new USB flash drive or delete unnecessary files to free up space. See this page for details about how to delete files. |
USB Device | Recording has been stopped due to the slow access speed of the USB flash drive. Access speed might temporarily slow down, depending on the condition of the product and the performance of the USB flash drive. If this occurs frequently, the performance of the USB flash drive might be insufficient. |
USB Device | Overcurrent detected on the USB flash drive. Immediately remove the USB flash drive from the product, and then turn the product off and back on. Failure to do so could result in damage to the product. |
USB Device | Write protection is enabled on the USB flash drive. Disable the write protection on the USB flash drive. |
User Sample | The memory for User Samples has been cleared. |
@