Search result
No more search results.
There are no topics that match your search query.
ProVisionaire Design V1.2 User Guide
- TOP
- 1. Introduction
- 2. Screen structure
- 3. The basics of using ProVisionaire Design
- 4. Menu bars and toolbar
- 5. Shortcut keys
- 6. List of alerts
- 7. "Project" sheet
- 8. "Tuning" sheet
- 9. Online and synchronization
-
10. Dialog boxes
- 10.1. Startup dialog box
- 10.2. "Go Online- From Devices" dialog box
- 10.3. "Protect File" dialog box
- 10.4. "Project Information" dialog box
- 10.5. "Print" dialog box
- 10.6. "File Storage" dialog box
- 10.6.1. [File Manager] dialog box
- 10.7. "Network Setup" dialog box
- 10.8. "IP Settings" dialog box
- 10.9. "IP Address" dialog box
- 10.10. "Auto-Assign IP Addresses" dialog box
- 10.11. "Match Devices by IP Address" dialog box
- 10.12. "Device Information" dialog box
- 10.12.1. “Detail>>” area
- 10.13. "Update Firmware" dialog box
- 10.14. "Initialize" dialog box
- 10.15. "Word Clock" dialog box
- 10.16. "Protect Devices" dialog box
- 10.17. "Clock" dialog box
- 10.17.1. RM Series
- 10.17.2. Non-RM Series
- 10.18. "Daylight Saving Time" dialog box
- 10.19. "GPI Calibration" dialog box
- 10.20. "Get Log from Devices" dialog box
- 10.21. "RM Series Settings" > "Sign up" dialog box
- 10.22. "RM Series Settings" > "Login" dialog box
- 10.23. "RM Series Settings" > "Password Settings" dialog box
- 10.24. "RM Series Settings" > "Enable SCP remote control access" dialog box
- 10.25. "Linked Presets Manager" dialog box
- 10.26. "Store Linked Preset" dialog box
- 10.27. Port Label Dialog
-
11. Context menus
- 11.1. Sheet tabs
- 11.2. "Project" sheet
- 11.2.1. Device in the "Project" sheet
- 11.2.2. Speaker in the "Project" sheet
- 11.2.3. Device group in the "Project" sheet
- 11.2.4. Text, Line, or Polygon in the "Project" sheet
- 11.2.5. Wire in the "Project" sheet
- 11.2.6. "Network" area
- 11.3. Device sheet
- 11.3.1. Components and component editors in the device sheet
- 12. Common operations for device sheets
-
13. Audio Processors: DME7
- 13.1. Overview
- 13.2. "Project" sheet
- 13.2.1. Tool bar
- 13.2.2. "Properties" area
- 13.3. Device sheet screen configuration
- 13.4. Basic use of ProVisonaire Designer
- 13.5. Tool buttons
- 13.6. "Components" area
- 13.7. Design sheet
- 13.7.1. Placing components
- 13.7.2. Selecting multiple components, ports, or wires
- 13.7.3. Connecting ports
- 13.7.4. Tracing the signal path
- 13.7.5. Duplicating an input port name
- 13.7.6. About [Unbundle Wires]
- 13.7.7. Duplicating components
- 13.8. Design sheet: Audio layer
- 13.8.1. Audio Component
- 13.9. Design sheet: Control layer
- 13.9.1. Using the audio component parameters in the Control layer
- 13.9.2. Controlling a Snapshot and ParamSet in the control component
- 13.10. Components other than audio or control components
- 13.10.1. Transmitter/Receiver
- 13.10.2. User Defined Block
- 13.10.3. Text
- 13.11. “Parameter Sets” area
- 13.11.1. Parameter Sets
- 13.11.2. Snapshot
- 13.11.3. Recall
- 13.11.4. Related Features
- 13.11.5. "Recall Settings" dialog box
- 13.12. “Properties” area
- 13.13. "Parameters" area
- 13.14. Context Menu
- 13.14.1. Design sheet
- 13.14.2. Components
- 13.14.3. Component Ports
- 13.14.4. Component editor / Parameter setting window
- 13.14.5. Wire
- 13.14.6. “Parameter Sets” area
- 13.14.7. “Parameters” area
- 13.15. Dialog box
- 13.15.1. ”Compile” dialog box
- 13.15.2. "Remote Control Setup List" dialog box
- 13.15.3. "SD Card File Manager" dialog box
- 13.15.4. "GPI" dialog box
- 13.15.5. "MIDI" dialog box
- 13.16. Message List
-
14. Audio Processor MRX7-D
- 14.1. Overview
- 14.2. Project Sheet
- 14.2.1. Toolbar
- 14.2.2. Devices Area
- 14.2.3. Properties Area
- 14.3. Device Sheet Screen Configuration
- 14.4. Basic Use
- 14.5. Tool Buttons
- 14.6. Components Area
- 14.7. Design Sheet
- 14.8. Non-Audio Components
- 14.9. Parameter Sets Area
- 14.9.1. Snapshot Group
- 14.9.2. Steps to create a snapshot group
- 14.10. Presets Area
- 14.10.1. Procedure
- 14.11. Parameter Link Group Area
- 14.11.1. Link Control Editor
- 14.12. Gang Edit Group Area
- 14.12.1. Procedure
- 14.13. Properties Area
- 14.14. Parameters Area
- 14.15. Context Menu
- 14.16. Dialog
- 14.16.1. Compile Dialog
- 14.16.2. Remote Control Setup List Dialog
- 14.16.3. File Transfer Application
- 14.16.4. SD Card File Manager Dialog
- 14.16.5. Scheduler Dialog
- 14.16.6. GPI Dialog
- 14.16.7. External Events Dialog
- 14.16.8. Install Speech Privacy File Dialog
- 14.17. Component Editor
- 14.17.1. Acoustic Echo Canceller Component Editor
- 14.17.2. [Effect] Component Editor
- 14.17.3. Analog In Component Editor
- 14.17.4. Slot In Component Editor
- 14.17.5. Analog Out Component Editor
- 14.17.6. Slot Out Component Editor
- 14.17.7. Speech Privacy Component Editor
- 14.18. Alert List
- 14.19. Flow of Paging Configuration
-
15. Audio Processors: MTX5-D/MTX3
- 15.1. Overview
- 15.2. "Project" sheet
- 15.2.1. "Devices" area
- 15.2.2. "Properties" area
- 15.3. Device sheet screen configuration
- 15.4. Tool buttons
- 15.5. "Presets" area
- 15.5.1. Recall
- 15.6. Context menus
- 15.6.1. MTX5-D sheet/MTX3 sheet
- 15.6.2. Components/in the MTX/component editor
- 15.7. Dialog box
- 15.7.1. "MTX Configuration" dialog box
- 15.7.2. "SD Card File Manager" dialog box
- 15.7.3. "Scheduler" dialog box
- 15.7.4. "GPI" dialog box
- 15.7.5. “External Events” dialog box
- 15.7.6. "Recall Settings" dialog box
- 15.7.7. "Recall Filter" dialog box
- 15.7.8. “Sampling Rate Converter” dialog box
- 15.8. Alert list
- 15.9. Component editors
- 15.9.1. "Analog In" component editor
- 15.9.2. “MY4-AEC” component editor
- 15.9.3. "Input CH" component editor
- 15.9.4. "Insert" component editor
- 15.9.5. "Zone" component editor
- 15.9.6. "Output CH" component editor
- 15.9.7. "Pilot Tone" component editor
- 15.9.8. "Analog Out" component editor
- 15.9.9. "Slot Out" component editor
- 15.9.10. "DCA Groups"/"Mute Groups" component editor
- 15.10. Workflow for paging settings
- 16. MTX I/O Expanders: EXi8 / Exo8
-
17. Power Amplifiers: PC-series
- 17.1. Overview
- 17.2. "Project" sheet
- 17.2.1. PC-D and speaker connections
- 17.2.2. "Properties" area
- 17.2.3. Speaker Editor / Multiple Speaker Editor
- 17.3. "Tuning" sheet
- 17.3.1. Link group editor
- 17.3.2. [User EQ/Volume] tab
- 17.3.3. [User Delay] tab
- 17.4. Device sheet screen configuration
- 17.5. "Presets" area
- 17.5.1. "Store Preset" dialog box
- 17.6. Context Menu
- 17.6.1. "Tuning" sheet
- 17.6.2. Link group in the "Tuning" sheet
- 17.6.3. "Project Devices" area
- 17.6.4. "Link Groups" area
- 17.6.5. Device sheet
- 17.6.6. Components in the device sheet/component editor
- 17.6.7. "Presets" area
- 17.7. Alert list
- 17.8. Component editors
- 17.8.1. "Power" component editor
- 17.8.2. "Input Alignment" component editor
- 17.8.3. "User EQ/User Delay" component editor
- 17.8.4. "Speaker Processor" component editor
- 17.8.5. "Amplifier" component editor
- 17.8.6. "Speaker Out" component editor
-
18. Power Amplifiers: XMV-series
- 18.1. Overview
- 18.2. "Project" sheet
- 18.2.1. "Properties" area
- 18.3. Tuning Sheet
- 18.3.1. Link group editor
- 18.3.2. "ATT"
- 18.3.3. "LINK MAIN"
- 18.4. Device sheet screen configuration
- 18.5. Context Menu
- 18.5.1. "Tuning" sheet
- 18.5.2. Link group in the "Tuning" sheet
- 18.5.3. "Project Devices" area
- 18.5.4. "Link Groups" area
- 18.6. Alert list
- 18.7. Component editors
- 18.7.1. "Power/ATT/Polarity" component editor
- 18.7.2. "Redundancy" component editor
- 18.7.3. "Speaker Out" component editor
- 18.7.4. "YDIF Patch" component editor
- 19. I/O Interface: Rio3224-D2 / Rio1608-D2
- 20. I/O Interface: Tio1608-D / Tio1608-D2
- 21. I/O Interface: RSio64-D
- 22. Powered Speakers: VXL1-16P
- 23. Microphones: PGM1
-
24. Microphones: RM-CG
- 24.1. Overview
- 24.2. "Project" sheet
- 24.3. [System] menu
- 24.4. "Network" area
- 24.5. "Properties" area
- 24.6. Device sheet screen configuration
- 24.7. Tool buttons
- 24.8. Component editors
- 24.8.1. "Microphone Settings" component editor
- 24.8.2. "DSP Settings" component editor
- 24.8.3. "Mute Settings" component editor
- 25. Microphones: RM-TT
- 26. External Device: Speakers
-
27. DCP
- 27.1. Overview
- 27.2. How to select the DCP to be connected
- 27.3. Setting method for DME7
- 27.3.1. DCP component setting
- 27.3.2. [Parameter Assign] tab
- 27.3.3. [Dimmer & Lock] tab
- 27.4. Setting method for MTX5-D/MTX3
- 27.4.1. DCP component settings
- 27.4.2. DCP component: Settings dialog (switch)
- 27.4.3. DCP component: Settings dialog (knob)
- 27.5. MRX7-D Setting Method
- 27.5.1. DCP Component Settings
- 27.5.2. [Parameter Assign] Tab
- 27.5.3. [Dimmer & Lock] Tab
- 27.5.4. [Source Select] Tab
- 28. Wall-mount Controller: MCP1
- 29. YDIF
-
30. Settings for controlling devices across subnets
- LANGUAGE
- Google Analytics