om01basicoperation0300
The Zone function enables control of multiple external devices from the built-in keyboard on this instrument.
On the MONTAGE M, you can use up to eight Zones per Performance.
For example, you can use this function to switch between the internal tone generator (tone generator block) and connected external sound modules by velocity or note range.
1Press the [PERFORMANCE] button to open the Performance screen.
2Select a Part and open the screen from [EDIT/
] → General/Pitch → Zone Settings.
] → General/Pitch → Zone Settings.The Zone Settings screen appears.
3Check the Part Mode setting.
Select Internal to play the sound from the tone generator block, and External to play the sound from the external sound module.
NOTE
You can also use a shortcut for changing the Part Mode setting. When [PART SELECT] is on, quickly pressing the corresponding PART button twice (double-clicking) switches between Internal and External settings.
4If necessary, set the parameters for Tx/Rx Ch (Transmit-Receive Channel) and Note Limit.
5Press the [STORE] button to save the Performance.
Print this page