Shortcut operations

By simultaneously pressing the [SHIFT] button and another button, you can use the shortcut operations to instantly access the functions shown below.

Operation	Function
[SHIFT] + Knob 1–8	Switches Knobs to high-precision mode or in smaller increments (slows down value changes). Convenient when making fine adjustments to values.
[SHIFT] + [EDIT/]	Calls up the Copy/Exchange screen.
[SHIFT] + KNOB POSITION [LEFT]	Registers the Assign 1–8 value assigned to the knob to the KNOB POSITION [LEFT] button.
[SHIFT] + KNOB POSITION [MID]	Registers the Assign 1–8 value assigned to the knob to the KNOB POSITION [MID] button.
[SHIFT] + KNOB POSITION [RIGHT]	Registers the Assign 1–8 value assigned to the knob to the KNOB POSITION [RIGHT] button.
[SHIFT] + [PAGE JUMP]	Calls up the parameter being edited on the Main display to the Sub display.
[SHIFT] + [PART SELECT]	Enables the PART buttons for turning the solo setting on or off.
[SHIFT] + [KEYBOARD CONTROL]	Enables the PART buttons for turning the mute setting on or off.
[SHIFT] + [1–8/9–16]	Enables the PART buttons and sliders to switch between Parts 9–16.
[SHIFT] + [COMMON]	Selects Common for Elements, Operators, and Oscillators.
[SHIFT] + PART [1]–[8]	Selects one from Element 1–8, Operator 1–8, Oscillator 1–3, and Noise.
[SHIFT] + OCTAVE [−]	Sets the transpose value to −1 (decrease).
[SHIFT] + OCTAVE [+]	Sets the transpose value to +1 (increase).
[SHIFT] + OCTAVE [−] + OCTAVE [+]	Sets the transpose value to 0 (reset).
[SHIFT] + SCENE [1]–[8]	Registers the created Scene to one of the SCENE [1]–[8] buttons.
[SHIFT] + [DEC/NO]	Sets the selected parameter value to −10 (decrease). Returns to the previous page on the Live Set screen.
[SHIFT] + [INC/YES]	Sets the selected parameter value to +10 (increase). Moves to the next page on the Live Set screen.
[SHIFT] + [ARP ON/OFF]	Calls up the Arp Edit screen.
[SHIFT] + [MSEQ ON/OFF]	Calls up the Motion Seq Edit screen.
[SHIFT] + [CONTROL ASSIGN]	Calls up the Control View screen.
[SHIFT] + [LATCH]	Calls up the Ribbon Settings screen.
[SHIFT] + [PERFORMANCE]	Calls up the Property screen (Home screen only).
[SHIFT] + [LIVE SET]	Moves to the Live Set Register screen.
[SHIFT] + [CATEGORY SEARCH]	Opens the Part Category Search screen for the selected Part.
[SHIFT] + [UTILITY]	Displays the parameter value.
[SHIFT] + [NAVIGATION]	Calls up the FX OVERVIEW screen.
[SHIFT] + [QUICK SETUP]	Calls up the Effect Switch screen.
[SHIFT] + [STORE]	Calls up the Load screen.
[SHIFT] + [SPLIT]	Calls up the Home screen with the Part—Note view selected.
[SHIFT] + [SONG/PATTERN]	Calls up the Rhythm Pattern screen.
[SHIFT] + [TEMPO/TAP]	Activates the panel lock function on or off. (Only on the Home screen or Live Set screen.)
[SHIFT] + Slot number [1]	Selects the first tab on the first column on the left side of the screen.
[SHIFT] + Slot number [2]	Selects the second tab on the first column on the left side of the screen.
[SHIFT] + Slot number [3]	Selects the third tab on the first column on the left side of the screen.
[SHIFT] + Slot number [4]	Selects the fourth tab on the first column on the left side of the screen.
[SHIFT] + Slot number [5]	Selects the fifth tab on the first column on the left side of the screen.
[SHIFT] + Slot number [6]	Selects the sixth tab on the first column on the left side of the screen.
[SHIFT] + Slot number [9]	Selects the first tab on the second column on the left side of the screen.
[SHIFT] + Slot number [10]	Selects the second tab on the second column on the left side of the screen.
[SHIFT] + Slot number [11]	Selects the third tab on the second column on the left side of the screen.
[SHIFT] + Slot number [12]	Selects the fourth tab on the second column on the left side of the screen.
[SHIFT] + Slot number [13]	Selects the fifth tab on the second column on the left side of the screen.
[SHIFT] + Slot number [14]	Selects the sixth tab on the second column on the left side of the screen.
[SHIFT] + [A/D INPUT ON/OFF]	Calls up the Audio In Edit screen.
[SHIFT] + [PORTAMENTO]	Calls up the Pitch Edit screen.
[SHIFT] + [ASSIGN 1]/[ASSIGN 2]	Calls up the Control Settings screen.

You can toggle between Internal and External by quickly pressing the corresponding PART button twice.
When switched to External, the Part name is displayed in blue.